Archipelago/worlds/jakanddaxter/docs/setup_en.md

Jak And Daxter (ArchipelaGOAL) Setup Guide

Required Software

• A legally purchased copy of Jak And Daxter: The Precursor Legacy.
• The OpenGOAL Launcher
• The Jak and Daxter .APWORLD package

At this time, this method of setup works on Windows only, but Linux support is a strong likelihood in the near future as OpenGOAL itself supports Linux.

Installation via OpenGOAL Launcher

You must set up a vanilla installation of Jak and Daxter before you can install mods for it.

• Follow the installation process for the official OpenGOAL Launcher. See here.
• Follow the setup process for adding mods to the OpenGOAL Launcher. See here.
• Run the OpenGOAL Launcher (if you had it open before, close it and reopen it).
• Click the Jak and Daxter logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods.
• Under Available Mods, click ArchipelaGOAL. The mod should begin installing. When it is done, click Continue in the bottom right corner.
• DO NOT PLAY AN ARCHIPELAGO GAME THROUGH THE OPENGOAL LAUNCHER. The Archipelago Client should handle everything for you.

For NTSC versions of the game, follow these steps.

• Run the OpenGOAL Launcher (if you had it open before, close it and reopen it).
• Click the Jak and Daxter logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL.
• In the bottom right corner, click Advanced, then click Compile.

For PAL versions of the game, follow these steps.

PAL versions of the game seem to require additional troubleshooting/setup in order to work properly. Below are some instructions that may help. If you see -- Compilation Error! -- after pressing Compile or Launching the ArchipelaGOAL mod, try these steps.

• Remove these folders if you have them:
  • <opengoal active version directory>/iso_data
  • <archipelagoal directory>/iso_data
  • <archipelagoal directory>/data/iso_data
• Place your Jak1 ISO in <archipelagoal directory> and rename it to JakAndDaxter.iso
• Type cmd in Windows search, right click Command Prompt, and pick Run as Administrator
• Run cd <archipelagoal directory>
• Then run .\extractor.exe --extract --extract-path .\data\iso_data "JakAndDaxter.iso"
  • This command should end by saying Uses Decompiler Config Version - ntsc_v1 or ... - pal. Take note of this message.
• If you saw ntsc_v1:
  • In cmd, run .\decompiler.exe data\decompiler\config\jak1\jak1_config.jsonc --version "ntsc_v1" data\iso_data data\decompiler_out
• If you saw pal:
  • Rename <archipelagoal directory>\data\iso_data\jak1 to jak1_pal
  • Back in cmd, run .\decompiler.exe data\decompiler\config\jak1\jak1_config.jsonc --version "pal" data\iso_data data\decompiler_out
  • Rename <archipelagoal directory>\data\iso_data\jak1_pal back to jak1
  • Rename <archipelagoal directory>\data\decompiler_out\jak1_pal back to jak1
• Open a brand new console window and launch the compiler:
  • cd <archipelagoal directory>
  • .\goalc.exe --user-auto --game jak1
  • From the compiler (in the same window): (mi). This should compile the game. Note that the parentheses are important.
  • Don't close this first terminal, you will need it at the end.
• Then, open another brand new console window and execute the game:
  • cd <archipelagoal directory>
  • .\gk.exe -v --game jak1 -- -boot -fakeiso -debug
• Finally, from the first console still in the GOALC compiler, connect to the game: (lt).

Updates and New Releases via OpenGOAL Launcher

If you are in the middle of an async game, and you do not want to update the mod, you do not need to do this step. The mod will only update when you tell it to.

• Run the OpenGOAL Launcher (if you had it open before, close it and reopen it).
• Click the Jak and Daxter logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL.
• Click Update to download and install any new updates that have been released.
• You can verify your version by clicking Versions. The version you are using will say (Active) next to it.
• Then you must click Advanced, then click Compile to make the update take effect.

Starting a Game

New Game

• Run the Archipelago Launcher.
• From the right-most list, find and click Jak and Daxter Client.
• 3 new windows should appear:
  • The OpenGOAL compiler will launch and compile the game. They should take about 30 seconds to compile.
    • You should hear a musical cue to indicate the compilation was a success. If you do not, see the Troubleshooting section.
  • The game window itself will launch, and Jak will be standing outside Samos's Hut.
    • Once compilation is complete, the title intro sequence will start.
  • Finally, the Archipelago text client will open.
    • If you see The REPL is ready! and The Memory Reader is ready! then that should indicate a successful startup.
• You can minimize the Compiler window, BUT DO NOT CLOSE IT. It is required for Archipelago and the game to communicate with each other.
• Use the text client to connect to the Archipelago server while on the title screen. This will communicate your current settings to the game.
  • Once you see AP CONNECTED! on the title screen, you should be ready.
• Start a new game in the title screen, and play through the cutscenes.
• Once you reach Geyser Rock, you can start the game!
  • You can leave Geyser Rock immediately if you so choose - just step on the warp gate button.

Returning / Async Game

• The same steps as New Game apply, with some exceptions:
  • Connect to the Archipelago server BEFORE you load your save file. This is to allow AP to give the game your current settings and all the items you had previously.
  • THESE SETTINGS AFFECT LOADING AND SAVING OF SAVE FILES, SO IT IS IMPORTANT TO DO THIS FIRST.
  • Once you see AP CONNECTED! on the title screen, you should be ready.
  • Then, instead of choosing New Game in the title menu, choose Load Game, then choose the save file CORRESPONDING TO YOUR CURRENT ARCHIPELAGO CONNECTION.

Troubleshooting

The Text Client Says "Unable to locate the OpenGOAL install directory"

Normally, the Archipelago client should be able to find your OpenGOAL installation automatically.

If it cannot, you may have to tell it yourself. Follow these instructions.

• Run the OpenGOAL Launcher (if you had it open before, close it and reopen it).
• Click the Jak and Daxter logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL.
• Click Advanced in the bottom right corner, then click Open Game Data Folder. You should see a new File Explorer open to that directory.
• In the File Explorer, go to the parent directory called archipelagoal, and you should see the gk.exe and goalc.exe executables. Copy this path.
• Run the Archipelago Launcher, then click on Open host.yaml. You should see a new text editor open that file.
• Search for jakanddaxter_options, and you will need to make 2 changes here.
• First, find the root_directory entry. Paste the path you noted earlier (the one containing gk.exe and goalc.exe) inside the double quotes.
• MAKE SURE YOU CHANGE ALL BACKSLASHES \ TO FORWARD SLASHES /.

  root_directory: "%programfiles%/OpenGOAL-Launcher/features/jak1/mods/JakMods/archipelagoal"

• Second, find the root_directory entry. Change this to false. You do not need to use double quotes.

  auto_detect_root_directory: true

• Save the file and close it.

The Game Fails To Load The Title Screen

You may start the game via the Text Client, but it never loads in the title screen. Check the Compiler window: you may see red and yellow errors like this.

-- Compilation Error! --

If this happens, follow these instructions. If you are using a PAL version of the game, you should skip these instructions and follow the Special PAL Instructions above.

• Run the OpenGOAL Launcher (if you had it open before, close it and reopen it).
• Click the Jak and Daxter logo on the left sidebar, then click Advanced, then click Open Game Data Folder. Copy the iso_data folder from this directory.
• Back in the OpenGOAL Launcher, click the Jak and Daxter logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL.
• In the bottom right corner, click Advanced, then click Open Game Data Folder.
• Paste the iso_data folder you copied earlier.
• Back in the OpenGOAL Launcher, click the Jak and Daxter logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL.
• In the bottom right corner, click Advanced, then click Compile.

The Text Client Says "Error reading game memory!" or "Error sending data to compiler"

If at any point the text client says this, you will need to restart the all of these applications.

• Close all open windows: the client, the compiler, and the game.
• Run the OpenGOAL Launcher, then click Features, then click Mods, then click ArchipelaGOAL.
• Click Advanced, then click Play in Debug Mode.
• Click Advanced, then click Open REPL.
• Then close and reopen the Jak and Daxter Client from the Archipelago Launcher.
• Once these are done, you can enter /repl status and /memr status in the text client to verify.

The Client Cannot Open A REPL Connection

If the client cannot open a REPL connection to the game, you may need to ensure you are not hosting anything on ports 8181 and 8112.

Known Issues

• The game needs to boot in debug mode in order to allow the compiler to connect to it. Clicking "Play" on the mod page in the OpenGOAL Launcher will not work.
• The Compiler console window is orphaned once you close the game - you will have to kill it manually when you stop playing.
• The console windows cannot be run as background processes due to how the REPL works, so the best we can do is minimize them.
• Orbsanity checks may show up out of order in the text client.
• Large item releases may take up to several minutes for the game to process them all.